JENCO 3010M TDS, Temperature Portable Meter

3010M

Simultaneous displays of conductivity, salinity or TDS with temperature

measurements.

50 data set reviewable memory.

Convenient one point calibration. Calibration data is stored in memory and

ready for use on power up.

Selectable cell constants for true wide range readings.

Adjustable TDS coefficient, reference temperature and temperature coefficient.                      

Uses one conductivity cell for conductivity, salinity and TDS measurements.

Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.

Automatic shutoff function (30 minutes of non-use).

Battery life over 1000 hours.

IP65 waterproof.

Low battery indicator.

RoHS and CE compliant.

Specifications

• 	RANGE	RESOLUTION	ACCURACY
  Conductivity	0.000 to 9.999uS/cm	0.001 uS/cm ,0.01uS/cm, 0.1uS/ccm,0.01mS/cm	±0.5 % FS
  	100.0 to 400.0uS/cm
  	0.00 to 99.99uS/cm
  	100.00 to 999.9uS/cm
  	1000 to 9999uS/cm
  	10.00 to 40.00mS/cm
  	0.0 to 999.9uS/cm
  	1000 to 9999uS/cm
  	10.00 to 99.99uS/cm
  	100.0 to 400.0mS/cm
  	10.0 to 99.99uS/cm
  TDS	0.000 mg/L to 400.0 g/L	0.001 mg/L	±0.5% FS
  Salinity	0.0 to 70.0 ppt	0.1 ppt	±0.5% FS
  Temp.	-10.0 to 90.0 °C	0.1 °C	± 0.2 °C or ±0.4%FS

  General

  • Reference temperature: From15.0 to 25 °C,default is 25.0 °C
  • Temperature Coefficient: From 0.00 to 4.00%,default is 1.91%
  • TDS Constant: From 0.30 to 1.00%,default is 0.65
  • Electrode Type / Cell Constant: Two wire K=0.1, 1.0 , 10 conductivity cells ,default is 1,0
  • ATC: Thermistor,10k ohm at 25°C
  • Power: 9Volt battery
  • Operating Ambient Conditions: From 0 to 50°C, at 90% RH
  • Weight:/Dimensions(W x D x H):260gm,(batteries included)/70mm x 186mm x37mm

Share this product