JENCO 3020M TDS, Temperature Portable Meter

3020M

Simultaneous displays of conductivity, salinity or TDS with temperature measurements.

50 data set reviewable memory.

Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.

Adjustable TDS coefficient, reference temperature and temperature coefficient.                      

Uses one conductivity cell for conductivity, salinity and TDS measurements.

Accepts 4-wire conductivity cell with K=0.475 cell constant and 2-wire K=0.1 cell constants for improved flexibility and accuracy.

Automatic shutoff function (30 minutes of non-use).

Battery life over 1000 hours.

IP65 waterproof.

Low battery indicator.

RoHS and CE compliant.

Specifications

• 	RANGE	RESOLUTION	ACCURACY
  Conductivity	0.00 to 99.99uS/cm,	0.01 uS/cm	±0.5 % FS
  	100.0 to 200.0uS/cm 0.0 to 499.9 uS/cm
  		0.1uS/cm
  	500 to 4999uS/cm	1uS/cm
  	5 to 49.99uS/cm	0.01mS/cm
  	50.00 to 200.0mS/cm	0.mS/cm
  TDS	0.00 mg/L to 200.0 g/L	0.01 mg/L	±0.5% FS
  Salinity	0.0 to 70.0 ppt	0.1 ppt	±0.5% FS
  Temp.	-10.0 to 90.0 °C	0.1 °C	± 0.2 °C or ±0.4%FS ,whichever is greater

  General

  • Reference temperature: From15.0 to 25 °C,default is 25.0 °C
  • Temperature Coefficient: From 0.00 to 4.00%,default is 1.91%
  • TDS Constant: From 0.30 to 1.00%,default is 0.65
  • Electrode Type / Cell Constant: 4 wire conductivity cells :K=0.475 and 2 wireconductivity cells K=0.1
  • ATC: Thermistor,10k ohm at 25°C
  • Power: 9Volt battery
  • Operating Ambient Conditions: From 0 to 50°C, at 90% RH
  • Weight:/Dimensions(W x D x H):260gm,(batteries included)/70mm x 186mm x37mm

Share this product