JENCO 6313 pH, ORP, Temperature In-line Analyzer

6313

Clear LCD displays pH or mV, with temperature and relay status simultaneously.              

Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.

Displays absolute and relative ORP.

Isolated and reversible 4-20 mA current output for pH or ORP allows it  to be used as a proportional output.

2 programmable on/off relays: 2 for pH or ORP.

CE Approved

Password protection.

IP65

Specifications

• 	RANGE	RESOLUTION	ACCURACY
  pH	-2.00 to 16.00ph	0.01pH	±0.01%±1 digit
  mV(absolute /relative)	-2500 to +2500mV /-6499 to +6499mV	1mV /1mV	±0.01%±1 digit
  Temperature	-10.0 to 120.0°C	0.1°C	±0.2°C

  General

  • pH Buffer Recognition (4.01 ,7.00 ,10.01) or NIST (4.00,6,86,9.18), user selectable
  • pH Electrode Offset Recognition: ±100mV at pH 7.00 /-91.7mV to +108,3mV at pH 6.86
  • pH Electrode Slope Recognition: ±30% at pH 4,00 , 4,01 ,9.18 or 10.01
  • Temperature Compensation: Auto -10.0 to 120.0°C(Thermistor , 10K ohm /Resisotr,Balco 3K ohm at /RTD, PT-1000 )
  • Input Impedance: >10(exp)13 ohms
  • Input Select: User selectable pH or ORP
  • Current Output Range: 4 to 20 mA(isolated),programmable span
  • Current Output Scale User programmable ,linear
  • Maximum Load: 500 ohm
  • Isolation Voltage: 500V DC
  • Control Type: 2 ON/OFF controls
  • Relay Output: 5A at 115V AC or 2.5A at 220V AC, resistive load only
  • Security: 4-dight password
  • Power :115 V AC or 230V AC at 50/60 HZ
  • Ambient Temperature Range: From 0 to 50 °C
  • Weight/Case: 940 grams / IP 65 ,1/4 DIN case, 148mm depth

Share this product