JENCO 3676 pH, ORP In-line Controller

3676

Description

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large led display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

Specifications

• 	RANGE	RESOLUTION	ACCURACY
  pH	0 to 14.00	0.01	± 0.01
  ORP	-1999 to 1999 mV	1	± 0.1%

• Controller Input Range

  • Current output pH/ORP: 0.00~14.00ph / -1400 ~ 1400 mV
  • Current output pH/ORP: 0.00~14.00ph / -1999 ~ 1999 mV

  Outputs

  • Relays output (max.): 5amp. at 115VAC, 2.5 amp. at 230 VAC,resistive lo
  • Relay hysteresis pH/ORP: ±0.1ph/±10 mV
  • Isolated 4~20mA output range: Over imput span
  • Accuracy: 0.1 % of span
  • Isolation voltage: 500VDC max.
  • Load resistance: 500 ohm max.

  General

  • Input impedance: Greater than 10exp(12) ohms
  • Temperature compensation: Auto 0 to 100°C
  • Readout: 12.7 mm high LCD
  • Operating temperature: 0 to 40 °C
  • Power source: 115/230 VAC ±15%,50/60hz
  • Dimensions: 96mm x 96mm x 119.3mm
  • Weight: 0.77 kg

Share this product