3250M

Clear LCD displays conductivity, salinity or TDS, simultaneously with temperature.

Convenient one point calibration. Calibration data is stored in memory and is ready for use on power up.

Accepts 2-wire and 4-wire conductivity cells with k=0.1, k=1.0 and K=10.0 cell constants for improved flexibility and accuracy.

Inclined back provides ideal viewing angle for benchtop use.

50 memory storage of conductivity, salinity, TDS with temperature reading with memory location ID.

RS-232 computer interface with software.

IP65 waterproof.

AC adaptor or battery power (low battery indicator).

	RANGE	RESOLUTION	ACCURACY
Conductivity	0.000 to 9.999uS/cm,10.0 to 99.99uS/cm ,1.0 00 to 9.999uS/cm,10.00 to 99.99mS/cm,100.0 to 200.0uS/cm	0.001 uS/cm ,0.01uS/cm, 0.1uS/cm,0.001mS/cm ,0.1mS/cm	±0.5 % FS
TDS	0.000 to 9.999 ppm,10.00 to 99.99ppm,100.0 to 999.9ppm,1,000 to 9.999ppt,10.00 to 99.99ppt,100.0 to 200.0ppt	0.1 ppt	±0.5% FS
Salinity	0.0 to 80.0 ppt	0.1 °C	±1%FS

Reference temperature: From15.0 to 25 °C,default is 25.0 °C
Temperature Coefficient: From 0.00 to 4.00%,default is 1.91%
TDS Constant: From 0.30 to 1.00,default is 0.65
Electrode Type / Cell Constant: Two wire or four wire conductivity cells :K=0.1,1.0,10.default is 1,0
ATC: Thermistor,10k ohm at 25°C
Output / Memory Storage:RS232 /50 sets
Power: 6 x 1.5 Volt AAA batteries or 115 /230V AC adapter
Operating Ambient Conditions: From 0 to 50°C, at 90% RH
Weight:/Dimensions(W x D x H):370gm,(batteries included)/83mm x 222mm x71mm

WATER QUALITY TEST